JNX10A

Intel® Apollo Lake E3940 SoC processor, onboard DDR3L up to 4GB, 1* GbE, 5V Standby & 12V Power

Features
1. Intel® Apollo Lake E3940 SoC Processor
2. Onboard DDR3L 1866MHz up to 8GB
3. 1* 10/100/1000 Base-TX Ethernet Ports
4. 1* DDI, 1* 18/24-bit Single CH LVDS
5. 2* TX/RX UART, 2* USB3.1 (Gen.1), 6* USB2.0
6. 2* SATA III (6Gb/s), 32GB onboard eMMC
7. Support 5V Standby & 12V Power

Categories: SoC-E3940, x86 Embedded Boards Tag: IoT-1.8SBC

Details
Inquiry

Overview｜Application｜Specifications｜Accessories


Overview	TOP∧

The JETWAY JNX10A is Type 10 COM Express Mini Module form factor board adopts the Intel® Apollo Lake E3940 SoC Processor. The board supports onboard DDR3L 1866MHz memory up to 8GB. Featuring the integrated Intel® Gigabit Ethernet controller, the JNX10A offers one 10/100/1000Base-TX Ethernet device for network transmission. Onboard 32GB eMMC & Two SATAIII (6Gb/s) port offers storage devices. Two USB3.1 (Gen.1), six USB2.0 and two TX/RX serial ports interfaces provide versatile expansion. The JNX10A offers one DDI port, one 18/24-bit single CH LVDS. Because of the above features, JNX10A is suitable for Industrial, Military, Gaming, Medical, Transportation, IoT Solution applications.


Application	TOP∧

● Industrial
● Military
● Gaming
● Medical
● Transportation
● IoT Solution

　Specifications

TOP∧　

Model
Model	– JNX10A
Form Factor
Form Factor	– Type 10 COM Express Mini Module (84 * 55mm)
Processor System
Processor/CPU	– Intel® Apollo Lake E3940 SoC Processor (TDP 9.5W) – AMI Flash ROM BIOS
Memory
Memory	– Onboard DDR3L 1866MHz SDRAM up to 8GB (Default 4GB)
Expansion Slot
Expansion	– Type 10 AB (Single) 220-pin connector – 4* PCIe x1 (Gen.2) – LPC
Storage
Storage	– 2* SATAIII interface – Onboard eMMC up to 128GB (Default 32GB)
Graphics
Graphics	– Intel® HD Graphics Gen.9, shared memory – 1* DDI (Max Resolution: 4096×2160@60Hz) – 1* 18/24-bit Single CH LVDS (Max Resolution: 1920 x 1080@60Hz)
Ethernet
Ethernet	– 1* Intel® GbE (1* i210IT)
Audio
Audio	– 6 channel HD audio: Realtek ALC662VD
Function
Internal Function	– 2* USB3.1 (Gen.1) – 6* USB2.0 – 1* Single CH LVDS – 2* TX&RX Serial ports – 2* SATAIII – 1* GPIO (8 bit) – 1* Audio interface – 1* SMBUS – 1* I2C – 1* CPU FAN – 1* TPM2.0 onboard (option)
Watchdog Timer
Watchdog Timer	– From Super I/O to drag RESETCON# – 256 segments (10sec ~ 255min)
Power
Power	5V Standby & 12V AT/ATX mode Supported – AT : Directly PWR on as Power input ready – ATX: Press Button to PWR on after Power input ready
Compliance
Certifications	– CE, FCC, LVD, RoHS, REACH
Environment
Temperature	– Operating: -20°C ~ 70°C – Storage: -40°C ~ 85°C
Warranty
Warranty	– 2 Years Limited Warranty